Flange coupling DIN 116
Robust shaft connection
The DIN 116 flange coupling made of high-quality grey cast iron or steel is a very robust connection coupling that is resistant to torsion and bending.
This coupling is one of the oldest designs for the rigid connection of two shafts and has been tried and tested for decades.
These rigid shaft couplings transmit high torques without wear and maintenance.
Other features of the clamping couplings are high rigidity and solid construction.
The two-part standard design of the rigid coupling DIN 116 (type A) enables simple and quick assembly.
The disc couplings are designed with a cylindrical finish bore and keyway as standard. In addition, bores with different diameters (type B), as well as with axial thrust washers for vertical assembly (type C) are available on request.
Advantages
Maintenance-free
Wear-free
Robust design
Long service life
Simple assembly
Areas of application
The areas of application of the DIN 116 flange couplings are mainly applications where no compensation of shaft misalignments is necessary and a high torque transmission is required.
Main applications are e.g. transmission shafts and mixers.
However, they are also used in general (special) machine construction for a wide range of applications.
Size/bore diameter and max. nominal torques
Size/bore diameter and max. nominal torques
| 25 | 25 mm | 46 Nm |
| 30 | 30 mm | 88 Nm |
| 35 | 35 mm | 150 Nm |
| 40 | 40 mm | 236 Nm |
| 45 | 45 mm | 355 Nm |
| 50 | 50 mm | 515 Nm |
| 55 | 55 mm | 730 Nm |
| 60 | 60 mm | 975 Nm |
| 70 | 70 mm | 1.700 Nm |
| 80 | 80 mm | 2.650 Nm |
| 90 | 90 mm | 4.120 Nm |
| 100 | 100 mm | 5.800 Nm |
| 110 | 110 mm | 8.250 Nm |
| 120 | 120 mm | 11.200 Nm |
| 125 | 125 mm | 12.800 Nm |
| 140 | 140 mm | 19.000 Nm |
| 160 | 160 mm | 30.700 Nm |
| 180 | 180 mm | 45.000 Nm |
| 200 | 200 mm | 61.500 Nm |
| 220 | 220 mm | 82.500 Nm |
| 250 | 250 mm | 118.000 Nm |
| 260 | 260 mm | 136.000 Nm |
| 280 | 280 mm | 170.000 Nm |
| 300 | 300 mm | 206.000 Nm |
| 320 | 320 mm | 250.000 Nm |
| 340 | 340 mm | 300.000 Nm |
| 360 | 360 mm | 355.000 Nm |
| 380 | 380 mm | 425.000 Nm |
| 400 | 400 mm | 487.000 Nm |
| 420 | 420 mm | 560.000 Nm |
| 450 | 450 mm | 710.000 Nm |
| 460 | 460 mm | 750.000 Nm |
| 500 | 500 mm | 950.000 Nm |
